Air intake temperature sensors matter most when an engine needs a clean, accurate signal for fuel and timing control. A tired sensor can turn a routine repair into a chase for rough running, hard starts, or inconsistent drivability after the fact. The right replacement comes down to fit, connector style, and whether the part is meant to match factory hardware or cover a broader vehicle range.
Quick Shortlist for Fast Comparison
ACDelco Gold 213-4663 (88864354) Intake Manifold Temperature Sensor
GM Genuine Parts 213-190 (25036751) Intake Air Temperature Sensor
GM Genuine Parts 213-243 (12160244) Intake Air Temperature Sensor
Air Intake Charge Temperature Sensor for Chrysler Dodge Jeep Ram
Standard Motor Products AX3T Air Charge Temperature Sensor
Intake Air Temperature Sensor IAT/MAT/ACT Kit for GM 25036751
MOTOKU Engine Intake Air Temperature IAT Sensor for Chrysler Dodge Jeep
More Details On Our Top Picks
ACDelco’s Gold line usually makes sense for GM owners who want a replacement that stays close to the original shape and role. This sensor sits in the intake path, so fit and signal consistency matter more than flashy details, especially on a daily driver that needs to settle back into normal behavior after a repair.
The trade-off is simple, it stays focused on the core job and doesn’t bring extra hardware or bundle value. For a garage routine that already leans on known GM parts, that narrow approach is often the point.
Strong Points
- Designed as a premium aftermarket replacement for GM use.
- Suited to ignition and fuel-management repair work.
- Matches the kind of fit drivers expect from a factory-style part.
- Helpful for owners who want a straightforward swap, not a custom setup.
Things To Consider
- Vehicle match still needs to be checked against the exact part number.
- No added harness or accessory kit is included.
Feature Snapshot
Who It Suits Best
GM owners handling a direct replacement on a street vehicle will get the most from this part.
A Better Fit Elsewhere
GM Genuine Parts 213-190 (25036751) Intake Air Temperature Sensor suits shoppers who want an original-equipment replacement path with a more exact GM-branded match.
This GM Genuine Parts sensor is the most straightforward choice in the group for a factory-style replacement path. It is aimed at the original component on a GM vehicle, which matters in a repair bay where compatibility problems can slow down everything else.
For commuters who just need the dashboard behavior and engine response to settle back into normal, that direct OE focus has real appeal. The honest trade-off is less versatility than the more broadly labeled aftermarket options farther down the list.
What We Like
- GM-recommended replacement for the original part.
- OE-oriented build direction suits factory restoration work.
- Good fit for owners who prefer a familiar service path.
- Helps keep the repair focused on one exact application.
Points To Note
- Best suited to GM vehicles, not broad cross-brand use.
- Shoppers still need to confirm the exact interchange before ordering.
Feature Card
Made For
GM vehicle owners who want a direct replacement with minimal guesswork fit this part best.
Where A Sibling Pick Shines
ACDelco Gold 213-4663 (88864354) Intake Manifold Temperature Sensor is a better fit for anyone wanting another GM-focused service part with a more aftermarket-leaning profile.
Compared with the 213-190 above, this GM Genuine Parts sensor leans more toward broad catalog coverage than a single narrow repair lane. That can be helpful in a mixed garage, where the same shop may be sorting out different GM applications over time.
The practical upside is simple, factory-style sourcing without extra clutter. The trade-off is the same one that shows up with most OE-leaning parts, it rewards careful part-number matching more than casual browsing.
Upsides
- GM-recommended replacement for original equipment.
- Useful across several GM service scenarios.
- Keeps the repair path close to factory intent.
- Well suited to shop inventory for common GM work.
Areas To Watch
- Fit confirmation matters before installation.
- No extra harness or kit components are listed.
Core Details
Who Will Love This
Shop owners and DIY mechanics working on several GM models will get the most value from this part.
Look Elsewhere When
Standard Motor Products AX3T Air Charge Temperature Sensor is a better match for anyone who wants a U.S.-made, vehicle-specific option outside the GM-only lane.
KEJSTED built this one for Chrysler-family vehicles, and the fit list is the main reason it stands out. In a driveway repair where the original connector and sensor form need to match without drama, a broad compatibility spread can save time.
It is a sensible pick for older Dodge, Jeep, and Ram setups that share common sensor hardware. The compromise is that broad vehicle coverage still requires close match checking, especially on platform-heavy model years where part numbers get messy.
Best Bits
- Covers a wide range of Chrysler, Dodge, Jeep, and Ram applications.
- Useful for owners replacing a worn factory-style sensor.
- Helps reduce the search burden for older platform repairs.
- Works well as a parts-bin candidate for familiar Mopar jobs.
Small Caveats
- Compatibility verification still matters before purchase.
- No harness or accessory bundle is listed here.
Technical Sheet
The Right Fit
Owners of Chrysler, Dodge, Jeep, and Ram vehicles with a direct-fit need will benefit most from this sensor.
A Better Fit Elsewhere
MOTOKU Engine Intake Air Temperature IAT Sensor for Chrysler Dodge Jeep is a stronger fit for shoppers who want a similar Mopar-focused part with a different catalog span.
Standard Motor Products keeps this one focused on vehicle-specific replacement work, and the U.S.-made label will matter to some garages more than others. The listed package size also hints at a part that is not trying to multitask as a bundle or kit.
For older cars and trucks with a precise sensor cavity, that no-frills approach is often useful. The honest trade-off is that the listing leaves less room for convenience extras than the kit-based GM option later in the list.
Highlights
- Vehicle-specific format helps keep fitment focused.
- Made in the United States, which may suit some sourcing preferences.
- Clear part form for straightforward replacement work.
- Good option for shops that keep exact-match parts on hand.
Room For Improvement
- No accessory pieces are listed with the sensor.
- Package dimensions are given, but connector detail is not.
At A Glance
Best Suited To
Owners of older vehicles that need a direct-fit sensor replacement will get the most out of this part.
Swap It Out When
Intake Air Temperature Sensor IAT/MAT/ACT Kit for GM 25036751 is the better match for anyone who also needs the pigtail harness in the same job.
Connector repair jobs are where this KEJSTED kit earns its place. The included pigtail harness matters because a damaged plug can make a good sensor feel like a partial fix, especially in older GM engine bays.
Compared with the bare sensors above, this bundle gives a more complete path for a do-it-once repair. That extra hardware is the upside, though it also means there’s a bit more installation work than a simple sensor swap.
Reasons To Buy
- Sensor and pigtail harness arrive together.
- Useful when the connector has heat wear or broken tabs.
- Fits a repair plan that goes beyond a simple part swap.
- Can save a second parts run during an active job.
Softer Spots
- Harness work adds installation steps.
- Best suited to GM interchange work, not universal use.
Details At A Glance
Who Should Grab It
GM owners dealing with a damaged connector and a tired sensor will get the most value from this kit.
Another Choice May Suit
GM Genuine Parts 213-190 (25036751) Intake Air Temperature Sensor is a simpler match for repairs that only need the sensor itself.
MOTOKU’s Chrysler-Dodge-Jeep sensor covers a long list of older platforms, and that breadth is its main selling point. For a home mechanic keeping an aging family vehicle alive, broad compatibility can be more useful than a polished package.
It differs from the KEJSTED Chrysler-family pick above by leaning harder into legacy coverage across cars, trucks, and vans. The catch is still the same: exact year and model matching matters, especially on vehicles that saw several intake sensor revisions.
Bright Spots
- Wide Chrysler, Dodge, and Jeep application list.
- Useful for older platforms that share similar sensor layouts.
- Good catalog fit for maintenance-minded owners of aging vehicles.
- Simple replacement format keeps the job focused.
Honest Caveats
- Compatibility should be confirmed against the exact vehicle year.
- No harness or extra installation parts are listed.
Feature Rundown
Whose Shelf It Belongs On
Owners maintaining older Chrysler, Dodge, or Jeep vehicles will find this a practical replacement path.
Where Shoppers Go Wrong
Air Intake Charge Temperature Sensor for Chrysler Dodge Jeep Ram is the better fit for anyone whose vehicle sits in the Ram side of the family tree.
What Matters Most Before Choosing Air Intake Temp Sensors
Common Shopping Slip Ups
Part number mismatches cause the most frustration in this category. Sensor names can look similar across GM, Chrysler, and aftermarket listings, so exact OE references and connector style deserve a careful read.
Where The Extra Money Goes
Higher-tier options usually reflect tighter factory matching, brand-specific cataloging, and in some cases extra hardware such as a harness. That matters most on older vehicles, where a one-step repair can save time and connector work later.
Frequently Asked Questions
What does an air intake temperature sensor do?
It reports incoming air temperature to the engine management system. That signal helps the vehicle adjust how it runs under changing conditions.
Are GM and Chrysler sensors interchangeable?
Not by name alone. Fit depends on the exact part number, connector layout, and vehicle application.
Does a sensor kit make sense over a single part?
A kit makes sense when the connector or pigtail is worn. A plain replacement is enough when the wiring side is still in good shape.
Why do some listings show multiple part numbers?
Multiple cross-reference numbers help match one sensor to several catalog entries. That makes lookup easier during repair planning.
What matters most during replacement?
Exact compatibility matters most, followed by connector condition and mounting style. A clean fit matters more than extra packaging details.
